Low Voltage Aluminum or Copper Conductor Busbar/Busway/Bus Duct System
Ac metal closed type shift switch cabinet is a three-phase ac 50HZ indoor device metal closed switch equipment.Is used in power plants, substation system rated voltage 35kV, rated maximum current 2000A maximum voltage no more than 40.5kV single bus or single bus sectionalized sets of distribution equipment.
This switch device meets the requirements of DL/ t404-91, IEC298, GB3906 and other standards, and has the functions of preventing wrong operation of circuit breaker, pushing and pulling handcart with load, grounding line, power transmission with grounding line and accidental charging interval (referred to as "five precautions")
Switchgear Structure
The Specification
| No |
Item |
Unit |
Parameter |
| 1 |
Rated voltage |
kV |
7.2kV, 12kV, 17.5kV, 24kV |
| 2 |
Ratec frequency |
Hz |
50/60 |
| 3 |
Rated current |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
| 4 |
Branch busbar rated current |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
| 5 |
Main busbar rated current |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
| 6 |
1 min power frequency withstand voltage(wet/dry) |
kV |
38/48, 50/60/60/65 |
| 7 |
Lightning impulse withstand voltage |
kV |
75, 95/125 |
| 8 |
Rated short circuit breaking current(peak) |
kA |
40/50/63/80/100 |
| 9 |
Short time withstand current(4s) |
kA |
20/25/31.5/40 |
| 10 |
Protection type |
|
IP4X for housing |
| No |
Item |
Unit |
Parameter |
| 1 |
Rated voltage |
kV |
36kV, 40.5kV |
| 2 |
Ratec frequency |
Hz |
50/60 |
| 3 |
Rated current |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
| 4 |
Branch busbar rated current |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
| 5 |
Main busbar rated current |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
| 6 |
1 min power frequency withstand voltage(wet/dry) |
kV |
70/95 |
| 7 |
Lightning impulse withstand voltage |
kV |
170/185 |
| 8 |
Rated short circuit breaking current(peak) |
kA |
20/25/31.5/40 |
| 9 |
Short time withstand current(4s) |
kA |
40/50/63/100 |
| 10 |
Protection type |
|
IP4X for housing |
Our Workshop
Note:1.All products will be tested before delivery.
2.All products can be customized.
Conditions of Use
1.The maximum ambient air temperature shall not exceed 40°C, and the minimum shall not below -25°C;
2.The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;
3.The vertical inclination is no more than 5°, and no violent vibration and impact;
4.The air humidity is not more than 90% (25°C);
5.No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;
6.Outdoor wind speed shall not exceed 35m/s;
7.If service conditions beyond the above, specially customized product is available.
.Packaging & Shipping
For the shipping , we accept EXW, FOB and CIF terms, you can use your own shipper or ours.
Fasten: To use steel wires to fasten the large products in container to make sure it is stable enough.
HFY Certificate and Services
1.Pre sale service
a. make technical solution
b. send quotation, technical data sheet and drawing
c. prepare power transmission plan, testing plan and shipment plan
2. In sale service
a. supervise the manufacturing schedule totally in accordance with the plan
b. send photos to customer during every manufacturing process(hold point)
c. inform the customer one week before testing.
3. After sale service
a. installation and commissioning, training the workers
b. quick response within 12 hours any time
c. provide 12 months guarantee period normally.
The Finished Power Project
Our Team and Exhibition
we are the large-scale electric complete sets of manufacturers in China, specializing in oil-immersed transform ers, dry-type transformers, high-voltage Cabinets, low-voltage cabinets and substa tion manufacturing specialized electrical enterprises. We can provide good quality and pretty competitive price.
FAQ
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.
Audited Supplier 
){kind=link}
){kind=link}