S11/S13 Series 10kv 415kv 250kVA Three Phase Oil Immersed Power Transformer, Pole Mounted Transformer IEC Standard

• Customization: Available
• Application: Power, Electronic, Lighting, Rectifier, Audio
• Phase: Three
• Model NO.: S11/S13
• Core: Core-type Transformer
• Cooling Method: Oil-immersed Type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: U
• Brand: Hfy
• Rated Voltage: S11/S13
• Rated Capacity: 30-20000kVA
• Frequency: 50/60Hz
• Transport Package: Wooden Case Packing
• Specification: 630*1170*1610
• Trademark: HFY
• Origin: China
• HS Code: 8504901900
• Production Capacity: 2000

Product Description

S11/S13 series 10kv 415kv 250kva three phase oil immersed power transformer,Pole mounted transformer IEC standard

Product Description
This product is suitable for power supply and distribution in coal mine, iron mine, aluminum mine, copper mine, gold mine, silver mine, zinc mine, titanium mine, oil field, gas field, oil and gas station,explosion hazard gas etc.
Product parameters



Transformer Structure

1.Iron core

Is made of high-quality grain oriented cold-rolled silicon steel sheet, with full oblique and holeless binding structure. The iron core is of multi-stage stepped shape, with three or five joints, low loss and low noise. The rolled iron core is directly wound by special equipment, without joints and angle weight, reducing magnetic resistance and low loss. The amorphous alloy transformer core is a new kind of higher quality iron core material, with an average drop of 72% for low air loss and 50% for no-load current compared with the traditional silicon steel sheet.
2. Coil
It is made of high-quality QQ acetal enamelled round copper wire and flat copper coin drawn by oxygen-free copper rod. Coil forms include cylinder type, continuous type, new spiral type, split type, etc with sufficient electrical strength, mechanical strength and heat dissipation capacity. In order to increase the short-circuit resistance of transformer, higher quality self-adhesive transposed conductor can be used. The coil is made of self-adhesive acetal enamelled flat wire. After being wound into a coil, the enamelled flat wires are mutually bonded to form a rigid coil, which can withstand greater bending stress, thus enhancing the short-circuit resistance of the transformer. The biggest characteristic of the self-adhesive transposed conductor is that it can reduce the loss of the transformer. The multi-split conductor and transposition can greatly reduce the eddy current loss and circulation loss, reducing the temperature rise of the hot spot of the winding, and make the temperature distribution of the whole winding more evenly.

 

Type	Rated Capacit(kVA)	H.V. winding  (kV)	Tapping range of high voltage(%)	L.V. winding  (kV)	Vector Group	No-Load  Loss(W)	Load Loss (W)	No-load current (%)	Short-circuit impedance (%)
ks9-200/6	200	6	±5	0.693 0.4	y,d11-d,d0 or y,y0,d11	0.48	2.600	1.3	4 4.5
ks9-250/6	250					0.56	3.050	1.2
ks9-315/6	315					0.67	3.650	1.1
ks9-400/6	400					0.80	4.300	1.0
ks9-500/6	500					096	5.100
ks9-630/6	630					1.20	6.200	0.9

Structural characteristics




 

Our Workshop


Note:1.All products will be tested before delivery.
2.All products can be customized.

Conditions of Use
1.The maximum ambient air temperature shall not exceed 40°C, and the minimum shall not below -25°C;
2.The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;
3.The vertical inclination is no more than 5°, and no violent vibration and impact;
4.The air humidity is not more than 90% (25°C);
5.No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;
6.Outdoor wind speed shall not exceed 35m/s;
7.If service conditions beyond the above, specially customized product is available.

6..Packaging & Shipping

For the shipping , we accept EXW, FOB and CIF terms, you can use your own shipper or ours.
Fasten: To use steel wires to fasten the large products in container to make sure it is stable enough.

7.HFY Certificate and Services

1.Pre sale service
a. make technical solution
b. send quotation, technical data sheet and drawing
c. prepare power transmission plan, testing plan and shipment plan
2. In sale service
a. supervise the manufacturing schedule totally in accordance with the plan
b. send photos to customer during every manufacturing process(hold point)
c. inform the customer one week before testing.
3. After sale service
a. installation and commissioning, training the workers
b. quick response within 12 hours any time
c. provide 12 months guarantee period normally.

8.The Finished Project

9.Team Show

we are the large-scale electric complete sets of manufacturers in China, specializing in oil-immersed transform ers, dry-type transformers, high-voltage Cabinets, low-voltage cabinets and substa tion manufacturing specialized electrical enterprises. We can provide  good quality and pretty competitive price.


FAQ
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.