33kv 1600kVA Dry Type Power Electrical Transformer, MOQ 1 Set., Shipped Worldwide, Factory &Manufacturer 30years, Get Free Quotes Now

• Application: Power
• Phase: Three
• Core: Core-type Transformer
• Cooling Method: Dry-type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001, CCC
• Model NO.: SCB
• Usage: Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: U
• Brand: Hfy
• Transport Package: Wooden Case Package
• Specification: 630*1170*1610
• Trademark: HFY
• Origin: China
• HS Code: 8504319000
• Production Capacity: 20000

Product Description

33kv 1600kVA Dry Type Power Electrical Transformer, MOQ 1 Set.,Shipped Worldwide,Factory &Manufacturer 30years,Get Free Quotes Now

 

Product introduction

1.Product Description
The reel core fully sealed distribution transformer is a new generation of low noise and low loss transformer developed in recent years. Its iron core has no joint, greatly reduces the no-load loss and no-load current, reduces the no-load current by 60%~80%, the high and low coils are continuously coiled on the core column, the winding is tight, the concentricity is good, and the product is enhanced more. Anti-theft performance. The noise decreased by more than 10 decibels. The temperature rise is low 16-20K. Because of the continuous winding of iron core (cross section is pure circle), the orientation loss of silicon steel sheet is fully utilized, and the no-load loss is reduced by 20%~30%.
The low voltage winding with capacity in the 630~2500kVA enclosure is made of cylinder or spiral structure with high mechanical strength and balanced ampere distribution. The product has good short circuit resistance.
The positioning structure is added to the body so that it does not produce displacement during the transportation process, and all fasteners are equipped with fastener nuts to ensure that the fasteners are not loose during the long run of the product and meet the requirements of the non core lifting.
The product surface is painted, primed and topcoat after degreasing, rust removing and phosphating. It can meet the special requirements of metallurgy, petrochemical system and wet dirty area.This series of products has beautiful appearance, small size, and can reduce the installation area. It is an ideal free maintenance quality product.

2.SCB Dry Type Power Transformer
The reel core fully sealed distribution transformer is a new generation of low noise and low loss transformer developed in recent years. Its iron core has no joint, greatly reduces the no-load loss and no-load current, reduces the no-load current by 60%~80%, the high and low coils are continuously coiled on the core column, the winding is tight, the concentricity is good, and the product is enhanced more. Anti-theft performance. The noise decreased by more than 10 decibels. The temperature rise is low 16-20K. Because of the continuous winding of iron core (cross section is pure circle), the orientation loss of silicon steel sheet is fully utilized, and the no-load loss is reduced by 20%~30%.
The low voltage winding with capacity in the 630~2500kVA enclosure is made of cylinder or spiral structure with high mechanical strength and balanced ampere distribution. The product has good short circuit resistance.
The positioning structure is added to the body so that it does not produce displacement during the transportation process, and all fasteners are equipped with fastener nuts to ensure that the fasteners are not loose during the long run of the product and meet the requirements of the non core lifting.
The product surface is painted, primed and topcoat after degreasing, rust removing and phosphating. It can meet the special requirements of metallurgy, petrochemical system and wet dirty area.This series of products has beautiful appearance, small size, and can reduce the installation area. It is an ideal free maintenance quality product.

Capacity	Rated voltage&Off-load tapping				Vector GroupSymbol		NO-load loss(W)	Load loss(W) F	NO-load current(%)	Short circuit impedance(%)	Applied test voltage (1min/50 Hz)		Impulse test voltage primary winding.full wave(kv)
	H.V(kv)	High pressure Tap range(%)		L.V(kv)
											Primary winding	Secondary winding
50	35 38.5	±5% ±2x2.5%		0.4	Dyn11 Yyn0		315	1280	2.3	6	70	3	170
100							440	1880	2	6	70	3	170
160							555	2530	1.5	6	70	3	170
200							615	3000	1.5	6	70	3	170
250							695	3420	1.3	6	70	3	170
315							820	4060	1.3	6	70	3	170
400							960	4870	1.1	6	70	3	170
500							1135	5985	1.1	6	70	3	170
630							1305	6920	1	6	70	3	170
800							1515	8210	1	6	70	3	170
1000							1700	9360	0.75	6	70	3	170
1250							1980	11430	0.75	6	70	3	170
1600							2270	13860	0.75	6	70	3	170
2000							2675	16380	0.75	6	70	3	170
2500							3115	19620	0.75	6	70	3	170
3150							4200	19960	0.75	6	70	3	170

3.Dry Type Transformer Structure 

Note:1.All products will be tested before delivery.
2.All products can be customized.

4.Conditions of Use

1.The maximum ambient air temperature shall not exceed 40°C, and the minimum shall not below -25°C;

2.The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;

3.The vertical inclination is no more than 5°, and no violent vibration and impact;

4.The air humidity is not more than 90% (25°C);

5.No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;

6.Outdoor wind speed shall not exceed 35m/s;

7.If service conditions beyond the above, specially customized product is available.

5.Packaging & Shipping

For the shipping , we accept EXW, FOB and CIF terms, you can use your own shipper or ours.
Fasten: To use steel wires to fasten the large products in container to make sure it is stable enough.

6.Our workshop 

7.HFY Certificate and Services



1.Pre sale service
a. make technical solution
b. send quotation, technical data sheet and drawing
c. prepare power transmission plan, testing plan and shipment plan
2. In sale service
a. supervise the manufacturing schedule totally in accordance with the plan
b. send photos to customer during every manufacturing process(hold point)
c. inform the customer one week before testing.
3. After sale service
a. installation and commissioning, training the workers
b. quick response within 12 hours any time
c. provide 12 months guarantee period normally.

8.The Finished Power Project 

 
9.The Exhibition And Team



we are the large-scale electric complete sets of manufacturers in China, specializing in oil-immersed transform ers, dry-type transformers, high-voltage Cabinets, low-voltage cabinets and substa tion manufacturing specialized electrical enterprises. We can provide good quality and pretty competitive price.

FAQ
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.