Power Supply 3 Phase 11KV electrical transformer customized epoxy resin dry type transformer
Product introduction
Dry-type transformer applies epoxy resin cast process instead of immersing iron core and windings in insulation oil. It consists of iron core made of silicon steel plates and epoxy resin cast coils. Insulation cylinder and other insulators between high and low windings are placed to increase electrical insulation. Its cushion blocks can support and restrain the coils, and its fasteners have anti-loose function. Without using insulation oil, dry-type transformer is fire-proof and explosion-proof, easy to maintain and has high reliability, low partial discharge and long operation life. After vacuum treatment and positive pressure, there is no bubble between turns and layers, and it can greatly reduce the amount of partial discharge. Also, it owns the advanges of small volume, low weight, low noise, high operating efficiency, save room and easy installation.
Product features
1. Low energy consumption: The adoption of isotropic soft magnetic material generates low magnetization power, high electrical resistivity and low eddy current consumption. The no-load loss and current of the core made of amorphous alloy are very low, only 1 / 3 of that of silicon steel sheet.
2. Strong corrosion resistance: the amorphous alloy core is fully wrapped by resin and high temperature resistant silica glen which effectively prevent corrosion and falling off amorphous alloy fragments, and provide better protection for the core and coil.
3. Low noise. Improvement of the structure of iron core and coil and adoption of special noise -reduction materials greatly reducing the operation noise.
4. Strong short-circuit resistance. This product adopts three-phase five-column structure, and the iron core is protected by frame structure. Featured by low temperature-rise and strong heat dissipation, this product can work by 150% rated load under air cooling condition. Perfect temperature control protection system is applied to provide reliable guarantee for safe operation of transformer
Conditions of use
1. The maximum ambient air temperature shall not exceed 40 ºC, and the minimum not lower than - 25 ºC;
2. The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are applied, the altitude can reach 4000m;
3. The vertical inclination shall not be higher than 5 °, and no violent vibration and impact;
4. The air humidity shall not be more than 90% (+ 25 ºC);
5. working in places where there is no gas and conductive dust that will seriously affect the insulation of transformer, no explosion hazard and no corrosion of electrical components;
6. Outdoor wind speed shall not exceed 35m / s.
7. If beyond the above normal use environment conditions, specially customized product is available with our company through mutual communication.
Transformer Structure of Dry Type Power Transformer:
Technical parameters
Rated capacity
(kVA) |
H.V. winding
(kV) |
Tapping range of high voltage (%)
|
L.V. winding
(kV) |
Vector group |
No-load
Loss
(kW) |
load
Loss
(kW) |
No-load
Current
(%) |
short circuit impedance
(%) |
| 30 |
6
6.3
6.6
10
10.5
11 |
±5
±2×2.5% |
0.4 |
Dyn11 |
0.07 |
0.71 |
1.6 |
4 |
| 50 |
0.09 |
1.00 |
1.4 |
| 80 |
0.12 |
1.38 |
1.3 |
| 10 |
0.13 |
1.57 |
1.2 |
| 125 |
0.15 |
1.85 |
1.1 |
| 160 |
0.17 |
2.13 |
1.1 |
| 200 |
0.20 |
2.53 |
1.0 |
| 250 |
0.23 |
2.76 |
1.0 |
| 315 |
0.28 |
3.47 |
0.9 |
6 |
| 400 |
0.31 |
3.99 |
0.8 |
| 500 |
0.36 |
4.88 |
0.8 |
| 630 |
0.42 |
5.88 |
0.7 |
| 630 |
0.41 |
5.96 |
0.7 |
| 800 |
0.48 |
6.96 |
0.7 |
| 1000 |
0.55 |
8.13 |
0.6 |
| 1250 |
0.65 |
9.69 |
0.6 |
| 1600 |
0.76 |
11.73 |
0.6 |
| 2000 |
1.00 |
14.45 |
0.5 |
| 2500 |
1.20 |
17.17 |
0.5 |
| 1600 |
0.76 |
12.96 |
0.6 |
8 |
| 2000 |
1.00 |
15.96 |
0.5 |
| 2500 |
1.20 |
18.89 |
0.5 |
Note:The above are some product technical parameters, if you have any questions, please contact us
Technical parameters of Dry Type Power Transformer:
Production equipment
Company Introduction for Distribution Voltage Electric Transformer:
1.Qingdao Hengfengyou Electrical Engineering Co., Ltd. (hereinafter referred to as Hengfengyou) is a large-scale enterprise group with electricity transmission and distribution as its main business,which integrates scientific research, development, manufacturing and trade. After 30 years rapid economy development in China, Hengfengyou now is a leading R & D, manufacturing and service base for MV , HV and ultra-HV power distribution equipment in China. At present,we have 50 senior technicians and more than 300 employees, with a complete sales and service system. Our products sell well at home and abroad, and our annual output value adds up to $100 million. .
2.At present, Hengfengyou has 6 wholly-owned and holding subsidiaries, which are respectively engaged in R & D, manufacturing and service of transformers, switchgear, package/unit substation, pole-mounted high-voltage vacuum circuit breakers, new energy, and electrical engineering. For a long time, the company has maintained close technical exchanges and cooperation with domestic and foreign universities, scientific research institutes and electric power enterprises. Hengfengyou independently designed and developed SCB series dry-type transformer and SC series oil immersed transformer. Our product performs with high operation efficiency, and obvious energy conservation. The overall performance index reaches the world's advanced level. The company also maintains long-term strategic partnership with Schneider, ABB, Simens, Chint and other electric suppliers. We absorbed foreign advanced experience in electrical equipment production and independently designed and developed a series of substation equipment, which realized the automation and intelligence of the substation, and of which the performance has been highly recognized by the user at home and abroad. In the following five years, the company plans to build an intelligent workshop with an annual output of 100000 transformers.Then,the intelligent robot will replace 80% of the existing labor force, which will greatly improve the production efficiency, lower production cost, and produce more energy-saving, environmentally friendly, more safe and reliable the product for the users!
HFY Certificate for Dry Type Power Transformer with ISO, ECE, CCC certificates, qualified ,anufacuture
The Finished Power Project for for Dry Type Power Transformer
Our Services--Dry Type Power Transformer professional solution
We have established strict working procedures and standards in the development, production, sales and after-sales of electrical products, so as to provide customers with first-class products and the best service.
1. Our electrical engineer has more than 10 years of working experience
2.Our workshop workers are all skilled industrial workers who have received three months 'pre-job training
3. Our sales team has been extensively trained by management consultants to provide professional solutions for customers
4. Our technical team can provide customers with 24-hour technical support world wide
5. Our customer service team ensures that orders are delivered on time.
Pre-sale service:
1.ISO certified excellent Manufacturer
2. Third-party authoritative certifications: SGS, CE, CB, CNAS, CQC, CCC, etc
3. Flexible payment: T/T, LC, O/A
4. Sufficient inventory, fast delivery time and long validity of the price
5. The whole process of picture tracking can be realized in production and transportation
6. Experienced professional sales team and a strong technical team
7. Sincerely invite customers to visit the company for guidance
After-sales service:
1. If there is any quality problem after receiving the goods, you can return the goods free of charge or ship new products
2. We provide our customers with a 2-year product warranty
3. Provide 24-hour, 365-day technical guidance worldwide
4. The VIP customers enjoy our promotional activity
The Exhibition And Team----Reliable electrial power transformer professional manufacture:
FAQ
Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.
Audited Supplier 
){kind=link}
){kind=link}